Skip to content
  • There are no suggestions because the search field is empty.

System Requirement

System Requirements

You can run the NetWitness® UEBA standalone installation as follows:

  • NetWitness Physical Hosts (software running on hardware supplied by NetWitness)

    • Install physical hosts and connect to the network as described in the NetWitness® Platform Hardware Setup Guides and the NetWitness® Platform Physical Host Installation Guide.

    • Set up licensing for NetWitness Platform as described in the NetWitness® Platform Licensing Guide.

  • On-Premises (On-Prem) Virtual Hosts (Software Only provided by NetWitness)

Physical Host Hardware Specifications

You must install the NetWitness UEBA host on the S6 (Dell R640 hardware).

Series 6 (DELL R640) SPECIFICATIONS

 

* NIC Card options are available for swap with on-board daughter card or add on.

Virtual Host Specifications

Following is the recommended system requirements for a UEBA virtual host.

The recommended vCPU specification for UEBA is Intel Xeon CPU @2.59 Ghz.

IMPORTANT: The /var/netwitness partition must be mounted on a 1.5 TB Thick-provisioned disk for storage usage.

Note: NetWitness recommends that you only deploy UEBA on a virtual host if your log collection volume is low. If you have a moderate to high log collection volume, NetWitness recommends that you deploy UEBA on the physical host.

Installation Media

Installation media are in the form of OVA packages, which are available for download and installation from Download Central. As part of your order fulfillment, NetWitness gives you access to the OVA.