Skip to content
  • There are no suggestions because the search field is empty.

Amperage Email Checkbox is Not Enabled after Logging into iDRAC UI

Issue

Amperage email checkbox is not enabled after logging to Log in to iDRAC UI → [Settings] → [System Settings] → [Alert Settings] → [Alerts] → [Alert Settings].

Resolution

Following are the steps to update the XML file after exporting the file from Server Configuration Profile and importing it back.
  1. Go to iDRAC → Settings → Server Configuration Profile → Export.
  2. Export the XML file with the following settings:
    "File name": Enter any file name.
    "Export components": Select All.
    "Export type": Select Basic.
    "Export file format": Enter XML.
    "Additional export items": All checkbox should be unchecked.
  3. Open the exported XML file with a text editor and do the following: 
    1. Edit the XML file.
    2. Change AlertEnable from Disabled to Enabled. For example, Enabled
    1. In Amperage (Critical) page, change Alerts_Email from Disabled to Enabled as shown below: Enabled
    1. Save the XML file.
     4. Import the edited XML file to iDRAC → Settings → Server Configuration Profile → Import.
       5. Once the file is imported successfully, check if the change is reflected in the iDRAC page.

Product Details

RSA Product Set: NetWitness Platform
RSA Product/Service Type:  NetWitness Platform
IDRAC Firmware Version: 3.30.30.30.30 or later
Platform: CentOS
O/S Version: 6/7


Approval Reviewer Queue

Technical approval queue