.png?width=180&height=32&name=NW%20Logo%20(2).png){kind=small}
Broker and Concentrator ConfigurationBroker and Concentrator Configuration
Setting up a Broker or Concentrator involves configuring the basic system parameters, the aggregate services, and the aggregation process between a Broker or Concentrator and the aggregate services.
These are the required configuration steps for a new Broker or Concentrator, and also for changing the configuration of an existing Broker. Perform the steps in the section in the sequence they are given.
Basic Configuration ChecklistBasic Configuration Checklist
The following checklist provides the sequence for tasks that are required to configure a Broker or Concentrator that has been added to NetWitness in accordance with the Hosts and Services Guide.
- Configuration Step:
Step 1 - Verify System Configuration
- Description:
Verify system configuration default values for the host and service are appropriate as described in Step 1. Verify Service System Configuration
- Configuration Step:
Step 2 - Configure Parameters
- Description:
Configure parameters that govern the overall aggregation process as described in Step 2. Configure the Aggregation Process
- Configuration Step:
Step 3 - Configure Aggregate Services
- Description:
Configure aggregate services as described in Step 3. Configure Aggregate Services
- Configuration Step:
Step 4 - Configure Group Aggregation
- Description:
(Optional) Configure group aggregation as described in Step 4. (Optional) Configuring Group Aggregation
- Configuration Step:
Step 5 - Start and Stop Aggregation
- Description:
Start and stop aggregation as described in Step 5. Start and Stop Aggregation