Skip to content
  • There are no suggestions because the search field is empty.

Configure Certificates

Configure CertificatesConfigure Certificates

You manage certificates by creating trust stores on the Log Collector. The Log Collector refers to these trust stores to determine whether or not the event sources are trusted.

Note: You can configure custom certificates for one or more event sources: for details, see (Optional) Configure Custom Certificates on Log Collectors.

Add a CertificateAdd a Certificate

To add a certificate:

  1. Go to netwitness_adminicon_25x22.png (Admin) > Services.
  2. In the Services grid, select a Log Collector service.
  3. Click netwitness_ic-actns.png under Actions and select View > Config.
  4. Click the Settings tab.
  5. In the options panel, select Certificates.

  6. Click netwitness_add_icon.png in the Certificates tool bar.

    The Add Cert dialog is displayed.

  7. Click Browse and select a certificate (*.PEM) from your network.
  8. Specify a password (if required).
  9. Click Save.

Certificates PanelCertificates Panel

The following table describe the buttons and columns available in the Certificates panel.

Add Cert DialogAdd Cert Dialog

The following table describes the parameters available in the Add Cert dialog.